Recently updated on December 17th, 2022 at 02:23 am
Are you planning to give your kitchen a quick makeover? Or is your kitchen faucet endlessly dripping? The sink is an integral part of your kitchen, and it’s impossible to carry out chores without it. Whatever DIY projects or repairs you do in the kitchen, you will need some hardware and tools.
However, not all of you will own a set of hand tools and other hardware. Especially when it comes to repairing kitchen faucets, you will need a basin wrench. Don’t have a basin wrench? Don’t worry because you can still fix that leaky faucet without basin wrench.
You no longer have to run to your nearby hardware store whenever you want to remove your kitchen faucet. You must know this kitchen faucet replacing hack for emergencies. Let’s see how to go about removing the kitchen faucet without a basin wrench.
How to remove kitchen faucet without basin wrench
Removing the kitchen faucet without basin wrench is not a difficult task. In this article, you can explore all the necessary tools and steps required to remove kitchen faucet. Without further delay, let’s explore the whole process.
What Tools Do I Need?
If you are going to remove your kitchen faucets without a basin wrench, there are still some tools that you’ll need. Below, you can check out the list of tools to collect before moving on to the water lines.
- A socket wrench
- A channel lock pliers
- A screwdriver
- Putty knife
- Some greasing oil
- A gauge of tape
- A clean cloth or towel
The socket wrench and channel lock pliers can be a great substitute when you don’t have a basin wrench. You must make sure that none of these items are missing before opening or removing the faucet.
Steps To Remove The Kitchen Sink
Once you have collected all the tools mentioned above, it’s time to get ready for the actual work. You must not skip any of these steps to remove your faucet quickly. There are many factors, such as air pressure and water supply lines, that you need to take care of.
Step 1: Turning Off The Water Valves
Whether you are putting on a new one or repairing your old one, make sure to turn off the faucet water valve. This step will make it easier to remove the kitchen sink. You have to locate the turn-off valves under the sink and firmly turn it towards the off position.
If your sink does not have this valve, then you’ve to cut down the entire water line of your home for a while. After turning the water off, you can have to open the sink to let the remaining water flow. In case the water valve is jammed, you can use the grease to loosen it up.
Many people make the mistake of not turning off the water supply, leading to a mess later.
Step 2: Opening The Faucet
After shutting off the water valves, open the sink and allow the water to flow. It will remove any air pressure from the sink. You must remove the pressure so that the faucet is easy to remove. Once the pressure is released, the tap will feel lighter.
Step 3: Disconnecting The Water Lines
Now that you’ve turned off the waterline, the next thing to do is remove the faucet. You can find the water supply lines underneath the faucet. It doesn’t matter whether you have a double handle sink or a single handle; there will always be two water lines.
One line will be for hot water while the other one will be for cold water. You might need a tool like an adjustable wrench to remove the water line properly.
Before you disconnect the water, don’t forget to block the sink using a clean cloth. Many people also prefer placing a bucket right below the faucet to catch the dripping water.
Step 4: Removing The Nuts
Now we’ve come to the part where you have to remove the nuts. Generally, a basin wrench is used to remove the nuts, but you can also use the socket tool since you don’t have them. Mineral deposits or corrosion can jam the nuts and bolts.
If the faucet is an old one, you might require some greasing to make things work. Let the grease or oil be there for 15 minutes, and then you can try again to remove the nuts.
Step 5: Disconnecting the water hose
The next thing to do is to disconnect the water hose and remove the faucet. Once you have completed this process, it’s time to replace your old faucet with a new one. After removing the nuts, you can safely remove the tap from its place. You must take all necessary precautions to avoid damaging the faucet.
You can also use the putty knife to make the work easier. You may also have to take apart the different pieces of the faucet to remove the unit safely.
We suggest that you go through the manufacturer’s manual for the correct removal instructions. After removing the faucet from its place, put it on a dry cloth.
See, we told you that you wouldn’t need that basin tool to make things work! Now you know how to remove kitchen faucet without basin wrench.
Frequently Asked Questions
What can I use if I don’t have a basin wrench?
If you don’t have a basin wrench, you can use a socket wrench and channel lock pliers to complete the process. Along with that, you will also require a couple of other items to remove the faucet properly. The removal process depends on the nuts, so you can easily do the job without basin wrenches.
How do you remove the nut from a kitchen faucet?
To remove the nuts from the kitchen faucet, you have to use the wrench. You may also use some grease if the nuts are too tight and are not coming off. Once you grease the nuts, use the socket wrench to remove or loosen them.
What tools do I need to remove a kitchen faucet?
To remove a kitchen faucet, you will require pliers and wrenches. Apart from that, you will also need tape, a screwdriver, grease for the nuts, and a cloth for the water line. Only with these handfuls of items and tools, you can do a DIY project on your kitchen faucet.
Let’s Recap
Once you’ve effectively removed the faucet and repaired the damages, your kitchen will be ready for a new faucet. In case you are not looking to place a new faucet, you can still use your old one. The next time your kitchen sink needs replacement, you don’t have to worry about having the basin wrench tool.
It’s important that you work with utmost precautions and care while removing the faucet. Also, it’s best if you don’t skip any of these steps.
If you follow this removal process thoroughly, your kitchen will have a new sink, and the hot and cold water flow will be back. We hope that this article could answer all your questions regarding how to remove kitchen faucet without basin wrench.